THE ULTIMATE LUNCHBOX STYLE PORTABLE COMPUTERS

WORLD'S FIRST PENTIUM-4, 2.2 GHZ PORTABLE

 

 

 
   

Home

Standard Configuration

DPS-9000 Models

Pricing

Expansion Options

Technical Specifications

Pictures

Client List

FAQ

Applications

Support

Contact Us

 

   
 

 

   
   

 

     
   

The World's Fastest Portable 

 

   
   

 

A-Series  |  S-Series  |  S2-Series  Comparison  Dual Pentium-III

 

System Board Specifications (A Series)

  • 100/133MHz AGP set Latest Generation Pentium ® III Chipset

  • National "309" Super I/O Chipset

  • Supports Pentium® II/III or Celeron® CPUs up to 1 GHz

  • Up to 2GB Memory Support, Synchronous DRAM W/SPD, SDRAM + ECC, Three 168-pin DIMM Sockets

  • 100MHz SDRAM support (100MHz SDRAM required for 100MHz FSB)

  • Two UltraDMA/66 PCI Bus-Master EIDE Ports, Supports EIDE CD-ROMs 

  • Bus-Mastering Mode 2 (Up to 22MB/sec DTR), PIO Mode 3 & 4 (Up to 17MB/sec DTR)

  • Two 16550 High Speed Serial Ports

  • One AT Style ECP/EPP High Speed Parallel Port

  • 2 USB Rev 1.2 headers (Up to 12 Mbps)

  • One IR (InfraRed) port header

  • One PS/2 Mouse port header

  • AT and ATX power connectors

  • PC98 compliant ES modes
    Year 2000 compliant

  • LM79/LM75 control chips with on-board alarm for heat, fan and voltage. Reports to the operating system for system monitoring

  • AMI Plug ‘n' Play 2Mb flash BIOS Standard

  • Deep Green / Energy Star / PC97 compliant


 

System Board Specifications (S Series)

 

Abit at a bus speed of 100/133 MHz, supports single Pentium III/II 233 ~ *1000 MHz processors. Onboard 2x ATA/100 EIDE channels.

 

It comes with 5 PCI and 1 ISA slots and an AGP connector. AGP reduces contention between the CPU and I/O devices by broadening the bandwidth of graphics to memory. It delivers a maximum 532 MB/s 2x transfer mode, which is quadruple the PCI speed. AGP offers a quantum-leap improvement in 3D graphics performance with far richer texture content!

 

Wake-on-LAN allows for remote network management and configuration of the PC, even in off-hours when the PC is turned off. This reduces the complexity of managing the network.

 

PC Health Monitoring
-Seven onboard voltage monitors for CPU core/s, CPU I/O, +3.3V, ± 5V, and ± 12V
-Three-fan status monitor with firmware/software on/off control
-CPU/chassis temperature control
-CPU fan auto-off in sleep mode
-CPU overheat alarm, LED and control
-Chassis intrusion detection
-System resource alert
-Supports SUPER Doctor and Intel LANDesk® Client Manager
-Hardware BIOS virus protection
-Auto-switching voltage regulator for CPU core, up to 20A of current

 

ACPI/PC 98 Features
-Microsoft OnNow
-Slow blinking LED for sleep-state indicator
-BIOS boot support for USB keyboard
-Real-time clock wake-up alarm
-Main switch override mechanism
-Remote modem ring-on when system is in SoftOff state

Other features that maximize customer satisfaction and provide simplicity in managing the computer are PC 98-ready and support for Advanced Configuration and Power Interface (ACPI). With PC Health Monitoring, you can protect your system from problems even before they occur.

The SUPER P6SBA in an ATX (12” x 7”) form factor board that can accommodate a total of 3 GB SDRAM memory at 100/133 MHz

Included I/O: 2 EIDE ports (ATA-100), a floppy port, an ECP/EPP parallel port, PS/2 mouse and PS/2 keyboard, 2 serial ports, an infrared port and 2 USB ports.

*1GHZ/133FSB SECC2 CPU tested ok on current production board.

 

 

Please call 866-DYNAPRO (396-2776) for custom configuration.

pcportable.com
A dynaPro Company
Email: info@pcportable.com
Tel: (732) 780-9696  Toll Free (866)-DYNAPRO  Fax: (732) 780-3784

© Copyright 2001 dynaPro International Inc.