|
|
A-Series
| S-Series
| S2-Series
| Comparison
| Dual
Pentium-III
System
Board Specifications (Dual Pentium II/III with IDE RAID)
CPU
1. Supports Pentium III Coppermine FC-PGA 370 processor (Based on 66/100/133MHz
clock)
Chipset
1. VIA chipset (VT82C694X and VT82C686B)
2. Supports Advanced Configuration and Power Management Interface (ACPI)
3. Supports AGP 1X/2X/4X (Sideband) 3.3V device
Ultra DMA 100
1. High Point HTP370 IDE Controller
2. Ultra DMA 100MB/Sec data transfer rate
3. RAID 0(stripping mode for boosting performance)
4. RAID 1 (mirroring mode for data security)
5. RAID 0 +1(stripping and mirroring)
Memory
1. Four 168-pin DIMM sockets support SDRAM module
2. Supports up to 2 GB MAX. (8, 16, 32, 64, 128, 256,512MB SDRAM)
3. Supports ECC
System BIOS
1. SoftMenuTM III to set CPU parameters
2. Award Plug and Play BIOS supports APM and DMI
3. Write-Protect Anti-Virus function by AWARD BIOS
4. Year 2000 Compliant
Multi I/O Functions
1. 2 Channels of Bus Master IDE Ports support Ultra DMA 33/66/100(up to 4 HDD
devices)
2. 2 Channels of Bus Master IDE Ports supporting Ultra DMA 33/66/100
3. PS/2 Keyboard and PS/2 Mouse Connectors
4. 1x Floppy Port (up to 2.88MB)
5. 1x Parallel Port (EPP/ECP)
6. 2x Serial Ports
7. 2x USB Connectors
8. On board USB header for two extra USB channels
Miscellaneous
1. ATX form factor
2.1 AGP slot, 5 PCI slots
3. Hardware monitoring Including Fan speed, Voltages, System environment
temperature and one Thermal header for CPU or other temperature monitoring.
4. Built-in Wake on LAN/Wake on Ring header
Picture
System
Board Specifications (64 bit Dual Pentium III with Adaptec 29160 SCSI)
Target
Segment
High-end
Server, Internet, e-business, clustering.
Form
Factor
Extended
ATX with PC99 color-coded double-deck I/O
Size:
12"
x 13" (W x H)
Processor
Support
Dual or
single Intel® 370-pin Pentium® III FCPGA 1 GHz - 500 MHz processors
Chipset
ServerWorks
ServerSet III HE-SL Chipset
Front
Side Bus (FSB)
133
/100 MHz
Memory
-
Four
3.3 volt, 168-pin registered DIMM sockets (PC100 or PC133)
-
Up
to 4 GB ECC registered SDRAM memory
Note: Supports only registered ECC memory. Non-ECC or unbuffered SDRAM are
not supported.
I/O
Expansion Slots
Onboard
Devices
-
Onboard
Intel® 82559 Ethernet controller
-
Onboard
Adaptec® AIC-7899 dual channel Ultra160 SCSI controller
-
Dual
Ultra DMA (UDMA/33) bus master/EIDE channels support data
transfer rates of up to 33 MB/sec
-
Dual
USB (Universal Serial Bus) ports
-
PS/2
keyboard and PS/2 mouse connectors
-
Two
fast UART 16550 compatible serial ports
-
One
ECP/EPP parallel port
-
One
floppy port
Other
Features
-
ACPI/APM
power management
-
AOL2
is optional
-
Internal/external
modem ring-on
-
Control
of power-on mode for recovery from AC power loss
-
One
WOL (Wake-On-LAN) connector
-
One
chassis intrusion connector
Chassis
Compatibility
-
Extended
ATX chassis
-
Fits
SC860, SC850, SC840, SC760, and SC830 chassis
Special
Features
-
Wake-on-LAN
allows for remote network management and configuration of the PC, even in
off-hours when the PC is turned off. This reduces the complexity of managing
the network.
-
Onboard
auto-switching power regulator supports CPU core voltages from 1.3 ~ 3.5
volts
-
Seven
tachometer fan connectors (two CPU, four chassis fan connectors and one
thermal control overheat fan connector)
-
Onboard
overheat buzzer
-
Overheat
LED indication connector
-
CPU
frequency settings in BIOS setup
-
Power-up
mode control upon recovery from AC power loss
BIOS
Features
-
Supports
ACPI (Advanced Configuration and Power Interface) and APM (Advanced Power
Management)
-
Slow
blinking LED for Sleep State indicator
-
Main
switch override mechanism. Power-up mode control upon recovery from AC power
loss
-
PC
Health Monitoring protects your system from problems even before they occur.
-
DMI
support
-
ACPI/APM
power management
-
RTC
(Real-Time Clock) wakeup
-
External
modem remote ring-on when system is in Soft-Off state
-
BIOS
rescue hot keys for rescuing BIOS chip from flash failure
-
Hardware
BIOS virus protection
-
4
Mb flash ROM (AMI BIOS)
PC
Health Monitoring
-
Four
onboard voltage monitors for CPU core, +2.5V, +3.3V, + 5V and + 12V Fan
status monitor
-
CPU/chassis
temperature monitoring
-
CPU
fan auto-off in sleep mode
-
CPU
overheat LED header
-
LED
and control for chassis intrusion detection
-
System
resource alert
-
Support
for system management software
-
Auto-switching
voltage regulator for CPU core, up to 20A of current
Picture
|